Navigacija

prof. dr Branislav Sredanović
vanredni profesor

Nastavnik - II-4
Mašinski fakultet
051/433-069
Katedre
  • Mašinski fakultet - Katedra za proizvodne i računarom podržane tehnologije
Uža naučna/umjetnička oblast Zvanje Datum izbora u zvanje
Proizvodno mašinstvo vanredni profesor 26. oktobar 2023.

Predmeti

Mašinski fakultet

Akademske studije drugog ciklusa
16-M10NTH Nanotehnologije
16-M11BPO Baze podataka obradnih procesa
16-M11KPR Konstruisanje pomoću računara II
16-M11MTH Mikrotehnika
16-M20SIR Studijski istraživački rad na teorijskim osnovama master rada
16-M21MIA Metode inženjerske analize
M1ZUT Zaštita pri unutrašnjem transportu
M1MS Modeliranje i simulacija
M1NT Nekonvencionalne tehnologije
M2KPR Konstruisanje pomoću računara
M2N Nanotehnologije
M2RIP Računarom integrisana proizvodnja
Akademske studije prvog ciklusa
07O1PT Proizvodne tehnologije
07O3AP1 Alati i pribori 1
07O3MK3 3D-CAD mašinsko konstruisanje
07O3TOR Tehnologija obrade rezanjem
07O3TRB Tribologija
11O1PT Proizvodne tehnologije
16-B40PPR Projektovanje pomoću računara
16-B50MDS Modeliranje i simulacija
16-B50PR2 Projektovanje pomoću računara II
16-B51KPR Konstruisanje pomoću računara II
16-B51PR2 Projektovanje pomoću računara II
16-B71MOB Mikroobrada
16-B71SMO Savremene metode obrade
16-B80KP2 Konstruisanje pomoću računara II
16-B80MSL Modeliranje i simulacija
16-B81RIP Računarom integrisana proizvodnja
20-B81MOB Mikroobrada
20-B81SMO Savremene metode obrade

Prirodno-matematički fakultet

Akademske studije prvog ciklusa
1C10TNS1002 Modelovanje i simulacije
1C18TNS1001 Obrada materijala
1C18TNS1002 Modelovanje i simulacije

Bibliografija

Radovi u časopisima

    Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method

    DOI 10.1007/s40430-024-04996-7
    Časopis JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
    Godina 2024
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Volumen 46
    Strana od 1
    Strana do 14
    Veb adresa https://link.springer.com/article/10.1007/s40430-024-04996-7

    Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques

    Časopis Applied Computing and Informatics
    Godina 2024
    Autori Đorđe Čiča, Branislav Sredanović, Saša Tešić i Davorin Kramar
    Volumen 20
    Broj 1-2
    Strana od 162
    Strana do 180

    ASSESSING THE PRECISION OF MACHINE TOOLS THROUGH VARIOUS MEASUREMENT SYSTEMS

    DOI http://doi.org/10.24867/JPE-2023-02-018 18 Note: This
    Časopis Journal of production engineering
    Godina 2023
    Autori Saša Tešić, Goran Jotić, Đorđe Čiča, Branislav Sredanović, Branko Štrbac i Miloš Ranisavljev
    Volumen 26
    Broj 2
    Strana od 18
    Strana do 22
    Veb adresa https://jpe.ftn.uns.ac.rs/index.php/jpe

    Investigation of dynamic behaviour of one complex steel structure

    DOI 10.1088/1742-6596/2540/1/012028
    Časopis Journal of physics. Conference series (Print)
    Godina 2023
    Autori Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Mladen Todić i Snežana Petković
    Volumen 2540
    Broj 1
    Strana od 012028
    Veb adresa https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012028/pdf

    Tribological aspects of nano-particle fluid based cooling and lubrication in milling process

    DOI https://doi.org/10.1088/1742-6596/2540/1/012020
    Časopis Journal of physics. Conference series (Print)
    Godina 2023
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić i Aleksandra Borković
    Volumen 2540
    Broj 1
    Strana od 012020
    Veb adresa https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012020/pdf

    Energy efficiency of the Process Planning Design in the scope of Industry 4.0

    DOI https://doi.org/10.1088/1742-6596/2540/1/012013
    Časopis Journal of physics. Conference series (Print)
    Godina 2023
    Autori Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić i Sergej Janković
    Volumen 2540
    Strana od 012013

    A Comparative Analysis of Milling Strategies of Complex Geometry Surfaces

    Časopis FME Transactions
    Godina 2022
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić i Stefan Gotovac
    Volumen 50
    Broj 4
    Strana od 623
    Strana do 634
    Veb adresa http://www.mas.bg.ac.rs/transactions

    Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition

    DOI https://doi.org/10.24874/ti.1301.05.22.07
    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2022
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Volumen 44
    Broj 3
    Strana od 498
    Strana do 507
    Veb adresa https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html

    Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska

    Časopis International Scentific Journal Industry 4.0
    Godina 2022
    Autori Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić i Jovica Ilić
    Volumen 6
    Strana od 240
    Strana do 243
    Veb adresa https://stumejournals.com/i4.htm

    Experimental analysis and optimization of thin-walled tubular parts milling

    DOI http://doi.org/10.24867/JPE-2022-02-006
    Časopis Journal of production engineering
    Godina 2022
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Volumen 25
    Broj 4
    Strana od 6
    Strana do 12
    Veb adresa http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf

    Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions

    DOI https://doi.org/10.1007/s40684-021-00413-9
    Časopis INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
    Godina 2022
    Autori Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar i Franci Pusavec
    Volumen 9
    Broj November 2022
    Strana od 1427
    Strana do 1437

    Experimental investigation of tool deflection in micro-milling of fine-grained graphite

    Časopis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Godina 2022
    Autori Đorđe Čiča, Branislav Sredanović i Goran Miljušković
    Volumen 123
    Strana od 161
    Strana do 168

    Capability of micro-milling in machining of difficult-to-cut materials

    Časopis International Scentific Journal Industry 4.0
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Volumen 6
    Broj 6
    Strana od 218
    Strana do 221
    Veb adresa https://stumejournals.com/journals/i4/2021/6/218

    Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

    Časopis ACTA TECHNICA CORVINIENSIS
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Volumen 14
    Broj 4
    Strana od 29
    Strana do 33
    Veb adresa http://acta.fih.upt.ro/ACTA-2021-4.html

    Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques

    Časopis International Journal of Machining and Machinability of Materials
    Godina 2020
    Autori Đorđe Čiča, Branislav Sredanović, Saša Tešić i Davorin Kramar
    Volumen 22
    Broj 2
    Strana od 153
    Strana do 164

    Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function

    Časopis TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
    Godina 2020
    Autori Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović i Saša Tešić
    Volumen 44
    Broj 1
    Strana od 84
    Strana do 94

    Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

    Časopis International Journal "Machines, Technologies, Materials"
    Godina 2019
    Autori Branislav Sredanović, Đorđe Čiča, Saša Tešić i Davorin Kramar
    Volumen 13
    Broj 11
    Strana od 491
    Strana do 494

    Influence of workpiece hardness on tool wear in profile micro-milling of hardened tool steel

    DOI 10.24874/ti.2018.40.01.09
    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2018
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Franci Pušavec
    Volumen 40
    Broj 1
    Strana od 100
    Strana do 107
    Veb adresa http://www.tribology.fink.rs/index.html

    Possibilities of application of high pressure jet assisted machining in hard turning with carbide tools

    DOI 10.24874/ti.2017.39.02.11
    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2017
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
    Volumen 39
    Broj 2
    Strana od 238
    Strana do 247
    Veb adresa http://www.tribology.fink.rs/journals/2017/2017-2/2017-2-11.html

    Experimental study on micro-machinability of hardened tool steel in profile micro-milling

    DOI 10.4028/www.scientific.net/SSP.261.85
    Časopis SOLID STATE PHENOMENA
    Godina 2017
    Autori Branislav Sredanović i Gordana Globočki-Lakić
    Volumen 261
    Strana od 85
    Strana do 92
    Veb adresa https://www.scientific.net/SSP/Details

    Hard turning of bearing steel AISI 52100 with carbide tool and high pressure coolant supply

    DOI 10.1007/s40430-017-0764-2
    Časopis JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
    Godina 2017
    Autori Branislav Sredanović i Gordana Globočki-Lakić
    Volumen 39
    Broj 11
    Strana od 4623
    Strana do 4632
    Veb adresa https://link.springer.com/journal/40430

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Časopis International Scentific Journal Industry 4.0
    Godina 2017
    Autori Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović i Stevo Borojević
    Volumen 1
    Broj 1
    Strana od 11
    Strana do 14

    Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts

    Časopis Journal of production engineering
    Godina 2017
    Autori Đorđe Čiča, Zeljkovic Milan, Branislav Sredanović i Sasa Tesic
    Volumen 20
    Broj 2
    Strana od 34
    Strana do 38

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Časopis International Journal "Machines, Technologies, Materials"
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 4
    Strana od 186
    Strana do 190

    Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques

    DOI 10.21278/TOF.40204
    Časopis TRANSACTIONS OF FAMENA
    Godina 2016
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
    Volumen 40
    Broj 2
    Strana od 45
    Strana do 58

    Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms

    DOI 10.1017/S0890060415000189
    Časopis AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC
    Godina 2016
    Autori Davorin Kramar, Đorđe Čiča, Branislav Sredanović i Janez Kopac
    Volumen 30
    Broj 1
    Strana od 96
    Strana do 106

    Analysis of Micro-Milling of Hardened Tool Steel

    DOI 10.4028/www.scientific.net/KEM.686.57
    Časopis Key Engineering Materials
    Godina 2016
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Volumen 686
    Strana od 57
    Strana do 62

    Dynamic analysis of spindle-holder-tool assembly

    Časopis Machine Design
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Volumen 8
    Broj 2
    Strana od 53
    Strana do 56

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Časopis Journal of production engineering
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Volumen 19
    Broj 1
    Strana od 57
    Strana do 60

    Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions

    DOI 10.4271/2015-01-9082
    Časopis International Journal of Materials and Manufacturing
    Godina 2015
    Autori Branislav Sredanović i Đorđe Čiča
    Volumen 8
    Broj 2
    Strana od 586
    Strana do 591

    High Pressure Jet Assisted Machining – Application in Turning

    Časopis Tribological Journal BULTRIB
    Godina 2015
    Autori Gordana Globočki-Lakić i Branislav Sredanović
    Volumen 5
    Broj 5
    Strana od 111
    Strana do 118

    Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study

    Časopis INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
    Godina 2015
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 50
    Broj 1
    Strana od 49
    Strana do 64

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Časopis ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering
    Godina 2014
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Volumen 12
    Broj 2
    Strana od 127
    Strana do 132

    Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN

    Časopis Journal of production engineering
    Godina 2014
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 17
    Broj 1
    Strana od 43
    Strana do 46

    Experimental research using of MQL in metal cutting

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2013
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
    Volumen 35
    Broj 4
    Strana od 276
    Strana do 258
    Veb adresa http://www.tribology.fink.rs/

    Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

    DOI 10.1155/5263
    Časopis Advances in Mechanical Engineering
    Godina 2013
    Autori Đorđe Čiča, Branislav Sredanović, Gordana Globočki-Lakić i Davorin Kramar
    Volumen 2013
    Strana od 1
    Strana do 8
    Veb adresa http://dx.doi.org/10.1155/2013/798597

    Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining

    Časopis STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Davorin Kramar
    Volumen 59
    Broj 12
    Strana od 748
    Strana do 754
    Veb adresa http://www.sv-jme.eu/home/

    Contribution to material machinability definition

    Časopis Journal of production engineering
    Godina 2012
    Autori Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
    Volumen 15
    Broj 2
    Strana od 27
    Strana do 32
    Veb adresa http://www.jpe.ftn.uns.ac.rs/

    Modelling of dynamical behavior of a spindle-holder-tool assembly

    Časopis STROJARSTVO
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
    Volumen 54
    Broj 2
    Strana od 135
    Strana do 144

    Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks

    Časopis Journal of production engineering
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Volumen 15
    Broj 2
    Strana od 37
    Strana do 40

    Development of mathematical model of universal material machinability

    Časopis JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION
    Godina 2011
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča i Dobrivoje Ćatić
    Volumen 17
    Broj 4
    Strana od 501
    Strana do 511

    Development of Application for Analysis of Machinability Index

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
    Volumen 31
    Broj 1&2
    Strana od 57
    Strana do 60

Radovi sa skupova

    Capability of micro-milling in machining of difficult-to-cut materials

    Naučni skup VI International Scientific Conference Industry 4.0
    Publikacija Proceedings of VI International Scientific Conference Industry 4.0
    Godina 2023
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Strana od 220
    Strana do 223

    Energy consumption analysis and parameter optimization in high-feed milling operation

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
    Publikacija Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
    Godina 2023
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić i Davorin Kramar
    Strana od 41
    Strana do 46

    Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti

    Naučni skup XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023
    Publikacija Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023
    Godina 2023
    Autori Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević i Branislav Sredanović
    Strana od 222
    Strana do 225

    Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska

    Naučni skup VII International Scientific Conference Industry 4
    Publikacija Proceedings of VII International Scientific Conference Industry 4
    Godina 2022
    Autori Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić i Jovica Ilić
    Strana od 277
    Strana do 280

    Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja

    Naučni skup 43. JUPITER konferencija
    Publikacija Zbornik radova sa 43. JUPITER konferencije
    Godina 2022
    Autori Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić i Milan Ćulum
    Strana od 11
    Strana do 16

    Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V

    Naučni skup 43. JUPITER konferencija
    Godina 2022
    Autori Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević i Branislav Sredanović
    Strana od 3.73
    Strana do 3.78

    Investigation of dynamic behaviour of one complex steel structure

    Naučni skup International Conference on Applied Science, ICAS 2022
    Godina 2022
    Autori Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Snežana Petković i Mladen Todić

    Education of production engineers for Industry 4.0

    Naučni skup 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022
    Publikacija Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022
    Godina 2022
    Autori Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević i Branislav Sredanović
    Strana od 91
    Strana do 96

    TRIBOLOGICAL ASPECTS OF NANO-PARTICLE FLUID BASED COOLING AND LUBRICATION IN MILLING PROCESS

    Naučni skup 10th INTERNATIONAL CONFERENCE OF APPLIED SCIENCE - ICAS 2022
    Publikacija ICAS 2022 CONFERENCE BOOK OF ABSTRACTS
    Godina 2022
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić, Aleksandra Šinik i Dragoslav Dobraš
    Strana od 100
    Veb adresa https://www.researchgate.net/publication/361073268_ICAS_2022_BOOK_OF_ABSTRACTS

    Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V

    Naučni skup 38th International Conference on Production Engineering Serbia ICPE 2021
    Publikacija Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021
    Godina 2021
    Autori Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević i Branislav Sredanović
    Strana od 96
    Strana do 101

    Experimental analysis and optimization of thin-walled tubular parts milling

    Naučni skup 14th International Scientific Conference MMA 2018
    Publikacija Proceeding of 14th International Scientific Conference MMA 2018
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Strana od 31
    Strana do 36

    Energy consumption model of the face milling

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
    Publikacija Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
    Godina 2021
    Autori Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović i Goran Jotić
    Strana od 89
    Strana do 93

    Comparative analysis of milling strategies of complex geometry surfaces

    Naučni skup 10th Internartional Conference on Tribology Balkantrib 20
    Godina 2021
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić i Stefan Gotovac

    Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

    Naučni skup DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Publikacija 15th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Strana od 71
    Strana do 77
    Veb adresa https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

    Energy consumption model of the face milling

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka
    Godina 2021
    Autori Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović i Goran Jotić
    Strana od 89
    Strana do 93
    Veb adresa https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

    Application of Taguchi method for identifying optimum specific energy consumption in CNC face milling

    Naučni skup 19th International Symposium INFOTEH-JAHORINA
    Godina 2020
    Autori Saša Tešić, Đorđe Čiča, Branislav Sredanović i Bojan Knežević
    Strana od 1
    Strana do 4

    Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije

    Naučni skup Jupiter konferencija
    Godina 2020
    Autori Branislav Sredanović, Stevo Borojević, Đorđe Čiča i Saša Tešić
    Strana od 2.20
    Strana do 2.25

    Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

    Naučni skup IV International Scientific Conference Industry 4.0
    Publikacija proceedings of IV International Scientific Conference Industry 4.0
    Godina 2019
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
    Strana od 283
    Strana do 286

    Generating and characteristic of surfaces in mechanical machining of micro-parts

    Naučni skup 16th International Conference on Tribology SERBIATRIB 19
    Publikacija Proceedings of 6th International Conference on Tribology SERBIATRIB 19
    Godina 2019
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Damir Grguras, Davorin Kramar i Franci Pusavec
    Strana od 468
    Strana do 473

    INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING

    Naučni skup 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka
    Godina 2019
    Autori Djordje Cica, Saša Tešić, Branislav Sredanović i Stevo Borojević
    Strana od 131
    Strana do 138

    Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining

    Naučni skup 14th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Godina 2019
    Autori Đorđe Čiča, Sasa Tesic, Branislav Sredanović i Stevo Borojević
    Strana od 131
    Strana do 138

    Possibility of hardened steel machining by application of high pressure cooling and lubrication technique

    Naučni skup 37th International Conference on Production Engineering of Serbia
    Godina 2018
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Živko Babić, Davorin Kramar, Janez Kopač i Franci Pušavec

    ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS

    Naučni skup MMA 2018 Flexible Technologies
    Godina 2018
    Autori Đorđe Čiča, Stevo Borojević, Branislav Sredanović i Saša Tešić
    Strana od 75
    Strana do 78

    Modeling and simulation of production process for the tools of the press brake

    Naučni skup 13th International scientific conference MMA 2018 - Flexible technologies
    Godina 2018
    Autori Stevo Borojević, Vid Jovišević, Đorđe Čiča i Branislav Sredanović
    Strana od 179
    Strana do 182

    Artificial neural networks model for the prediction of surface roughness in machining thin walled parts

    Naučni skup 13th International scientific conference MMA 2018 - Flexible technologies
    Godina 2018
    Autori Đorđe Čiča, Stevo Borojević, Branislav Sredanović i Sasa Tesic
    Strana od 75
    Strana do 78

    Study on the machinability characteristics of Inconel 718 super alloy during micro-milling

    Naučni skup 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
    DOI 10.1007/978-3-319-56430-2_28
    Publikacija Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
    Godina 2017
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 375
    Strana do 385
    Veb adresa https://link.springer.com/chapter/10.1007/978-3-319-56430-2_28

    An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning

    Naučni skup 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović, Stevo Borojević i Davorin Kramar
    Strana od 1
    Strana do 12

    Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning

    Naučni skup 15th International Conference on Tribology SERBIATRIB‘17
    Publikacija Proceedings of 15th International Conference on Tribology SERBIATRIB‘17
    Godina 2017
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
    Strana od 487
    Strana do 495

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Naučni skup INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Strana od 75
    Strana do 79

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Naučni skup International Scientific Conference Industry 4.0
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Strana od 22
    Strana do 25

    A predictive model of cutting forces in MQL turning usig genetic algorithm

    Naučni skup 3rd International scientific conference COMETa
    Godina 2016
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Strana od 237
    Strana do 242

    Application of micro -cutting in machining of hard-to-machine materials

    Naučni skup IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka,
    Publikacija IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016
    Godina 2016
    Autori Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač

    Analysis of Micro-Milling of Hardened Tool Steel

    Naučni skup 8th International Congress on Precision Machining ICPM 2015
    Publikacija Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 57
    Strana do 62

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Naučni skup International Scientific Conference MMA 2015 - Flexible Technologies
    Godina 2015
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Strana od 67
    Strana do 71

    Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique

    Naučni skup DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology
    Publikacija Proceedings, DEMI 2015, ISBN 978-99938-39-53-8
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 293
    Strana do 299

    Specifics of The Design for CNC Plasma Cutting

    Naučni skup DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka
    Publikacija Proceedings, 2015., ISBN 978-99938-39-53-8
    Godina 2015
    Autori Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 241
    Strana do 249

    New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4

    Naučni skup 14th International Conference on Tribology SERBIATRIB 2015
    Publikacija Proceedings
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 367
    Strana do 375

    The importance of modeling in the study of machinability

    Naučni skup 5th International Conference on Manufacturing Engineering - ICMEN
    Publikacija Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8
    Godina 2014
    Autori Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 1
    Strana do 12

    Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja

    Naučni skup 39. Jupiter konferencija
    Publikacija Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3
    Godina 2014
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 130
    Strana do 135

    Effects of using of MQL technique in metal cutting

    Naučni skup International Conference on Tribology - SERBIATRIB 2013
    Publikacija Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6
    Godina 2013
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
    Strana od 276
    Strana do 285

    Cutting Force Modeling in Hard Alloy Steel Turning

    Naučni skup International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 389
    Strana do 396

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Naučni skup 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0
    Godina 2013
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 283
    Strana do 291

    A novel method for material machinability evaluation

    Naučni skup International Conference of Sustainable Life in manufacturing - SLIM 2013
    Publikacija Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
    Strana od 110
    Strana do 116

    Contribution to material machinability definition

    Naučni skup 3th International Conference of Sustainable Life in manufacturing - SLIM 2012
    Publikacija Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012
    Godina 2012
    Autori Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
    Strana od 28
    Strana do 33

    Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU

    Naučni skup 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012
    Publikacija Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2
    Godina 2012
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki -Lakić i Branislav Sredanović
    Strana od 203
    Strana do 209

    Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine

    Naučni skup 38. Jupiter konferencija, 2012
    Publikacija Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7
    Godina 2012
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 1
    Strana do 8

    Application of CAD/CAM systems for machining parts of aluminium profiles

    Naučni skup International scientific conference MMA 2012– Advanced Production Technologies
    Publikacija 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Đorđe Čiča i Aleksandar Milutinović
    Strana od 227
    Strana do 231

    Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks

    Naučni skup International scientific conference MMA 2012 – Advanced Production Technologies
    Publikacija Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Strana od 57
    Strana do 61

    Analiza obradivosti materijala pomoću aplikativnog računarskog programa

    Naučni skup 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012
    Publikacija Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča i Vid Jovišević
    Strana od 81
    Strana do 88

    Development of DamageCALC application for automatic calculation of damage indicator

    Naučni skup DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System
    Publikacija Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12
    Godina 2012
    Autori Valentina Golubović-Bugarski, Branislav Sredanović i Gordana Globočki-Lakić
    Strana od 1
    Strana do 6

    Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation

    Naučni skup 37. Jupiter konferencija,2011
    Publikacija Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9
    Godina 2011
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 8
    Strana do 15

    Laboratories under requirements of directives and standards of European Union

    Naučni skup 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
    Godina 2011
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 361
    Strana do 366

    Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Bogdan Nedić i Đorđe Čiča
    Strana od 109
    Strana do 114

    Application of artificial intelligence in modeling of metal cutting process

    Naučni skup 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry
    Publikacija 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9
    Godina 2011
    Autori Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 120
    Strana do 124

    Identification of face funcionality with program system for purpose of modular fixture design

    Naučni skup 34th International Conference on Production Engineering. Niš,2011
    Publikacija Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 197
    Strana do 200

    Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation

    Naučni skup 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović i Marko Radisavljević
    Strana od 419
    Strana do 426

    Modeling of dynamical behavior spindle‐holder‐tool assembly

    Naučni skup 34.International Conference on Production Engineering
    Publikacija 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Strana od 117
    Strana do 120

    Modeling of cutting forces with artificial neural networks

    Naučni skup ICMEN 2011- International Conference on Manufacturing engineering
    Publikacija Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević i Valentina Golubović-Bugarski
    Strana od 123
    Strana do 132

    Detection of structural damage location using frequency response function data

    Naučni skup DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Godina 2011
    Autori Valentina Golubović-Bugarski, Drago Blagojević, Đorđe Čiča i Branislav Sredanović
    Strana od 129
    Strana do 134

    Quality monitoring of production systems and processes in form of vector of power

    Naučni skup International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry
    Publikacija Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7
    Godina 2010
    Autori Branislav Sredanović i Gordana Globočki-Lakić
    Strana od 418
    Strana do 420

    Algorithm for C1 continuous tool path: some experiences, problems and suggestions

    Naučni skup International Conference on Innovative Technologies - IN‐TECH
    Publikacija International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
    Godina 2010
    Autori Đorđe Čiča, Simo Jokanović, Stevo Borojević i Branislav Sredanović
    Strana od 160
    Strana do 164

    Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9
    Godina 2010
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 3.22
    Strana do 3.27

    Vector based approach in definning of universal machinability

    Naučni skup International Conference on Innovative Technologies IN-TECH 2010
    Publikacija International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
    Godina 2010
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević i Đorđe Čiča
    Strana od 326
    Strana do 330

    Modeliranje vretenastih glodala primjenom CAD/CAM sistema

    Naučni skup Jupiter konferencija,
    Godina 2010
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
    Strana od 3.28
    Strana do 3.31

    Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema

    Naučni skup International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009
    Publikacija Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6
    Godina 2009
    Autori Branislav Sredanović, Gordana Globočki-Lakić i Stevo Borojević
    Strana od 255
    Strana do 260

    Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja

    Naučni skup 33. savjetovanje proizvodnog mašinstva, 2009
    Publikacija 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4
    Godina 2009
    Autori Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić i Đorđe Čiča
    Strana od 31
    Strana do 34

    Development of Application for Analysis of Machinability Index

    Naučni skup 11. International Conference on Tribology – Serbiatrib 2009
    Publikacija Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
    Strana od 251
    Strana do 254

Ostali radovi

    Preliminary experimental research on micro-milling, report

    Izdavač Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
    Godina 2013
    Autori Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 13

    Contribution to defining of universal machinabilty, report

    Izdavač Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
    Godina 2012
    Autori Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 26

    Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report

    Izdavač Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
    Godina 2012
    Autori Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 10

Knjige

    Modeliranje procesa obrade rezanjem - uticaj hlađenja i podmazivanja

    Izdavač Mašinski fakultet Unverziteta u Banjoj Luci
    ISBN 978-99976-11-02-4
    Godina 2023
    Autori Branislav Sredanović
    Tip knjige naučna knjiga
    Broj strana 261

    Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim)

    Izdavač De Gruyter, Berlin
    ISBN 978-3-11-069317-1
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča i Davorin Kramar
    Tip knjige ostale naučne publikacije
    Broj strana 71
    Veb adresa https://doi.org/10.1515/9783110693225-007

    Alati i pribori u obradi rezanjem

    Izdavač Univerzitet u Banjoj Luci, Mašinski fakultet
    ISBN 978-99938-39-68-2
    Godina 2016
    Autori Gordana Globočki -Lakić i Branislav Sredanović
    Tip knjige osnovni udžbenik
    Broj strana 514

    Praktično projektovanje pomoću računara u paketu SOLIDWORKS

    Izdavač Mašinski fakultet Banja Luka
    ISBN xxx
    Godina 2014
    Autori Branislav Sredanović, Živko Babić i Simo Jokanović
    Tip knjige ostale nastavne publikacije
    Broj strana 253

Projekti

Analiza mogućnosti izrade dijelova gorive ćelije čvrstog oksida od visokootpornih i teškoobradivih metalnih materijala

Svrha istraživanja je sagledavanje mogućnosti mašinske obrade visokootpornih metalnih materijala u cilju izrade pojedinih dijelova gorive ćelije čvrstog oksida. Poznato je da se pri radu gorive ćelije čvrstog oksida razvija visoka temperatura (oko 800-850 stepeni celzijusa). Da bi metalni materijali bili postojani na tim temparaturama, potrebno je da budu toplotno otporni, otporni na oksidaciju i električno provodljivi...

Broj projekta 1256016
Status Aktivan
Tip projekta Nacionalni naučnoistraživački
Organizaciona jedinica Mašinski fakultet
Rukovodilac prof. dr Stevo Borojević
Projektni tim prof. dr Đorđe Čiča
Gordana Tošić, ma
Jovica Ilić
prof. dr Branislav Sredanović
Saša Tešić
Finansijer Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske
Početak realizacije 01.01.2024.
Završetak projekta 01.01.2025.
Vrijednost projekta 6000.0 BAM

Razvoj kućišta gorivih ćelija čvrstog oksida od visokootpornih metalnih materijala

Opis Jedan od glavnih izazova sa kojima se suočava razvoj SOFC-a koji ometaju stabilan i pouzdan rad je degradacija performansi. Na performanse SOFC-a može značajno uticati nehomogena distribucija temperature, distribucija struje i potencijala, distribucija specifičnih gasovitih vrsta, uslovi protoka, itd. U cilju optimizacije rada SOFC-a, potrebno je projektovati odgovarajuće kućište ćelije za ispitivanje SOFC-a na odgovarajući način. Ovo bi trebalo da omogući ...

Broj projekta 1256010
Status Aktivan
Tip projekta Međunarodni naučnoistraživački - Ostali
Organizaciona jedinica Mašinski fakultet
Rukovodilac prof. dr Stevo Borojević
Projektni tim prof. dr Đorđe Čiča
Saša Tešić
prof. dr Branislav Sredanović
Finansijer Ministarstvo civilnih poslova BiH
Početak realizacije 01.01.2023.
Završetak projekta 31.12.2024.
Vrijednost projekta 10000.0 BAM

Uticaj koncepta Industrije 4.0 na transformaciji savremenog univerzitetskog inženjenjrskog obrazovanja u AP Vojvodini i Republici Srpskoj

Cilj projekta je istraživanje koje se odnosi na uticaj industrije 4.0 na univerzitetsko obrazovanje u području mašinskog inženjerstva.

Broj projekta 1256008
Status Neaktivan
Tip projekta Međunarodni naučnoistraživački - Ostali
Organizaciona jedinica Mašinski fakultet
Rukovodilac prof. dr Stevo Borojević
Projektni tim prof. dr Branislav Sredanović
Nebojša Kićanović
Jovica Ilić
Finansijer AUTONOMNA POKRAJINA VOJVODINA,POKRAJINSKI SEKRETARIJAT ZA VISOKO OBRAZOVANJE I NAUČNOISTRAŽIVAČKU DJELATNOST
Početak realizacije 01.03.2022.
Završetak projekta 17.10.2023.
Vrijednost projekta 48730.0 BAM

Primjena metoda vještačke inteligencije pri mikroglodanju superlegura

Saradnja sa Mašinskim fakultetom u Ljubljani u oblasti razvoja ekspertnog inženjerskog sistema i pratećih baza podataka o procesu mikroobrade dijelova složenog geometrije i izrađenih od materijala sa posebnim svojstvima. Ciljevi projekta: 1. Definisanje okvira za razvoj ekspertnog sistema za upravljanje procesom mikroobrade dijelova složene geometrije. 2. Primjena mikroglodanja pri obradi složenih...

Broj projekta 1256006
Status Neaktivan
Tip projekta Međunarodni naučnoistraživački - Ostali
Organizaciona jedinica Mašinski fakultet
Rukovodilac prof. dr Branislav Sredanović
Projektni tim prof. dr Đorđe Čiča
Saša Tešić
prof. dr Stevo Borojević
Finansijer Ministarstvo za naučnotehnološki razvoj i visoko obarzovanje Republike Srpske
Početak realizacije 01.07.2021.
Završetak projekta 30.06.2023.
Vrijednost projekta 4000.0 BAM

PostBANOROB(BLiM) projekt

PostBANOROB projekat je direktan nastavak projekta BANOROB koji je uveo znanja i tehnologije visokog ranga, kao i savremenu laboratorijsku opremu na Univerzitetu u Banjoj Luci. Ovi rezultati sada omogućuju vrhunske obrazovne i istraživačkih aktivnosti u području proizvodnog mašinstva...

Broj projekta 8301009
Status Neaktivan
Tip projekta Herd
Organizaciona jedinica Rektorat
Rukovodilac prof. dr Simo Jokanović
Projektni tim prof. dr Gordana Globočki Lakić
prof. dr Branislav Sredanović
prof. dr Đorđe Čiča
prof. dr Stevo Borojević
Finansijer Vlada Norveške ,HERDICT program
Početak realizacije 01.01.2015.
Završetak projekta 31.12.2016.
Vrijednost projekta 74880.0 BAM