prof. dr Milan Tica
redovni profesor
Nastavnik - II-4
Mašinski fakultet
051/433-039 |
Katedre |
|
|
---|---|---|
Uža naučna/umjetnička oblast | Zvanje | Datum izbora u zvanje |
Mašinske konstrukcije | redovni profesor | September 21, 2023 |
Predmeti
Mašinski fakultet
Akademske studije drugog ciklusa | Akademske studije prvog ciklusa |
---|
Bibliografija
Radovi u časopisima
Analysis of Power Losses in Constrained Cycloid Drive
DOI | https://doi.org/10.17559/TV-20230426000572 |
---|---|
Časopis | Tehnički vjesnik |
Godina | 2023 |
Autori | Tihomir Mačkić, Nenad Marjanović, Milan Tica, Sanjin Troha, Miroslav Milutinović, and Nebojša Rašović |
Volumen | 30 |
Broj | 4 |
Strana od | 1104 |
Strana do | 1111 |
Veb adresa | https://hrcak.srce.hr/305454 |
Analysis of Power Losses in Constrained Cycloid Drive
DOI | 10.17559/TV-20230426000572 |
---|---|
Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
Godina | 2023 |
Autori | Tihomir Mačkić, Nenad Marjanović, Milan Tica, Sanjin Troha, Miroslav Milutinović, and Nebojša Rašović |
Volumen | 30 |
Broj | 4 |
Veb adresa | https://doi.org/10.17559/TV-20230426000572 |
An Analysis of the Influence of Surface Roughness and Clearance on the Dynamic Behavior of Deep Groove Ball Bearings Using Artificial Neural Networks
DOI | https://doi.org/10.3390/ ma16093529 |
---|---|
Časopis | Materials |
Godina | 2023 |
Autori | Ivan Knežević, Milan Rackov, Ana Buljević, Aco Antić, Ž Kanović, Milan Tica, and Aleksandar Živković |
Volumen | 3523 |
Broj | 16 |
Veb adresa | https://doi.org/10.3390/ ma16093529 |
Reliability Evaluation of Transmission Planetary Gears “bottom-up” approach,
DOI | https://doi.org/10.17531/ein.2023.1.2 |
---|---|
Časopis | EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY |
Godina | 2023 |
Autori | Predrag Živković, Miroslav Milutinović, Milan Tica, Spasoje Trifković, and Ivica Čamagić |
Volumen | 25 |
Broj | 1 |
Veb adresa | https://doi.org/10.17531/ein.2023.1.2 |
Reversible Planetary Gearsets Controlled by Two Brakes, for Internal Combustion Railway Vehicle Transmission Applications
DOI | 10.12700/aph.20.1.2023.20.7 |
---|---|
Časopis | ACTA POLYTECHNICA HUNGARICA |
Godina | 2023 |
Autori | Milan Tica, Sanjin Troha, Željko Vrcan, and Dragan Marinković |
Volumen | 20 |
Broj | 1 |
Strana od | 95 |
Strana do | 108 |
Veb adresa | https://doi.org/10.12700/aph.20.1.2023.20.7 |
Investigation of Air-cooled Condenser’s Operating Parameters in Modern Thermal Power Plant
DOI | https://doi.org/10.2298/TSCI220806203S |
---|---|
Časopis | THERMAL SCIENCE |
Godina | 2023 |
Autori | Jovan Škundrić, Predrag Živković, Milan Tica, Mladen Tomić, and Cristian Barz |
Volumen | 27 |
Broj | 3B |
Strana od | 2477 |
Strana do | 2487 |
Veb adresa | https://thermalscience.vinca.rs/ |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
DOI | https://doi.org/10.6723/TERP.202212_6(2).0003 |
---|---|
Časopis | IETI Transactions on Engineering Research and Practice |
Godina | 2022 |
Autori | Tihomir Mačkić, Milan Tica, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
Volumen | 6 |
Broj | 2 |
Strana od | 18 |
Strana do | 23 |
Veb adresa | https://doi.org/10.6723/TERP.202212_6(2).0003 |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN.
DOI | https://doi.org/10.6723/TERP.202212_6(2).0003 |
---|---|
Časopis | STED Journal |
Godina | 2022 |
Autori | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Milosav Milutinović |
Veb adresa | https://doi.org/10.6723/TERP.202212_6(2).0003 |
Research into the Properties of Selected Single Speed Two-Carrier Planetary Gear Trains
DOI | https://doi.org/10.22055/JACM.2021.39143.3358 |
---|---|
Časopis | Journal of Applied and Computational Mechanics |
Godina | 2022 |
Autori | Željko Vrcan, J Stefanović-Marinović, Milan Tica, and Sanjin Troha |
Volumen | 8 |
Broj | 2 |
Veb adresa | https://doi.org/10.22055/JACM.2021.39143.3358 |
Analysis of Impact of Shaft Speed and External Load on the Radial Ball Bearing Lubrication Regimes
DOI | https://doi.org/10.5937/fme2201109G |
---|---|
Časopis | FME Transactions |
Godina | 2021 |
Autori | R Grujičić, Milan Tica, B Stojanović, L Ivanović, Radivoje Mitrović, and R Tomović |
Broj | 50 |
Veb adresa | https://doi.org/10.5937/fme2201109G |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES
Časopis | ACTA TECHNICA CORVINIENSIS |
---|---|
Godina | 2020 |
Autori | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
Volumen | FASCICULE 4 |
Broj | TOME XIII |
Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation
DOI | doi:10.3390/polym12081737 |
---|---|
Časopis | Polymers |
Godina | 2020 |
Autori | Milan Banić, Dušan Stamenković, Aleksandar Miltenović, Dragan Jovanović, and Milan Tica |
Volumen | 1773 |
Broj | 12 |
Veb adresa | www.mdpi.com/journal/polymers |
PREDICTION OF TEMPERATURE DISTRIBUTION IN THE WORM GEAR MESHING
DOI | 10.22190/FUME180120016M |
---|---|
Časopis | FACTA UNIVERSITATIS Series: Mechanical Engineering |
Godina | 2020 |
Autori | Aleksandar Miltenović, Milan Tica, Milan Banić, and Đorđe Miltenović |
Volumen | 18 |
Broj | 2 |
Strana od | 329 |
Strana do | 339 |
Veb adresa | https://doi.org/10.22190/FUME180120016M |
Analysis of Speed Ratios of Simple Cycloid Drive With Stepped Planets
Časopis | ACTA TECHNICA CORVINIENSIS |
---|---|
Godina | 2020 |
Autori | Milan Tica and Tihomir Mačkić |
Volumen | XIII |
Broj | 4 |
Strana od | 105 |
Strana do | 108 |
Veb adresa | https://acta.fih.upt.ro/pdf/2020-4/ACTA-2020-4-19.pdf |
Mechanical Properties of Modified Flipwing Hydrokinetic Turbines
Časopis | ACTA TECHNICA CORVINIENSIS |
---|---|
Godina | 2020 |
Autori | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
Volumen | XIII |
Broj | 4 |
Strana od | 45 |
Strana do | 48 |
Veb adresa | https://acta.fih.upt.ro/pdf/2020-4/ACTA-2020-4-08.pdf |
Transmission characteristics of simple cycloid drive with stepped planets
DOI | doi:10.1088/1757-899X/659/1/012071 |
---|---|
Časopis | International Conference on Innovative Ideas in Science (Online) |
Godina | 2019 |
Autori | Tihomir Mačkić, Milan Tica, and Roland Suba |
Volumen | 659 |
Broj | 012071 |
Veb adresa | https://iopscience.iop.org/article/10.1088/1757-899X/659/1/012071/pdf |
ANALYSIS OF SPEED RATIOS OF SIMPLE CYCLOID DRIVE WITH STEPPED PLANETS
Časopis | ACTA TECHNICA CORVINIENSIS |
---|---|
Godina | 2019 |
Autori | Tihomir Mačkić and Milan Tica |
Volumen | FASCICULE 4 |
Broj | TOME XIII |
DESIGN SOLUTION AND CALCULATION OF IMPORTANT ELEMENTS OF HAND DRILL AND ANGLE GRINDER TABLE STAND
DOI | https://doi.org/10.24867/MD.11.2019.2.59-62 |
---|---|
Časopis | Machine Design |
Godina | 2019 |
Autori | Milan Tica, Nikola Radulovic, Milan Banić, Aleksandar Miltenović, and Milan Rackov |
Volumen | 11 |
Broj | 2 |
Veb adresa | https://doi.org/10.24867/MD.11.2019.2.59-62 |
Selection of optimal concept solution for preventing wrong fuel using in cars
Časopis | Machine Design |
---|---|
Godina | 2017 |
Autori | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
Volumen | 9 |
Broj | 3 |
Strana od | 117 |
Strana do | 122 |
Permissibile temperatures and thermal stability of worm gears
Časopis | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
---|---|
Godina | 2017 |
Autori | Milan Tica, Đorđe Miltenović, Milan Banić, and Aleksandar Miltenović |
Volumen | XV |
Broj | 3 |
Strana od | 61 |
Strana do | 66 |
Load Capacity of Worm Gears with Compact Design
Časopis | Annals of Faculty Engineering Hunedoara - International Journal of Engineering |
---|---|
Godina | 2016 |
Autori | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, and Milan Banić |
Volumen | XIV |
Broj | 1 |
Strana od | 79 |
Strana do | 84 |
Construction solution and estimate of important elements assemblies of log splitter
Časopis | Machine Design |
---|---|
Godina | 2015 |
Autori | Milan Tica, Branislav Čolić, and Slobodan Čapljak |
Volumen | 7 |
Broj | 3 |
Strana od | 79 |
Strana do | 84 |
Pitting of Teeth Flanks of Crossed Helical Gears Made from Sintered Steel
Časopis | TRANSACTIONS OF FAMENA |
---|---|
Godina | 2014 |
Autori | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, Milan Banić, S. Živković, and Žarko Mišković |
Strana od | 77 |
Strana do | 88 |
Thermal Stability of Crossed Helical Gears with Wheel made from Sintered Steel
Časopis | THERMAL SCIENCE |
---|---|
Godina | 2012 |
Autori | Aleksandar Miltenović, Siniša Kuzmanović, Vojislav Miltenović, Milan Tica, and Milan Rackov |
Volumen | 16 |
Strana od | 541 |
Strana do | 553 |
Veb adresa | http://thermalscience.vinca.rs/2012/supplement-2/22 |
Theoretical analysis of the dominant construction-technolological parameters of the lumber scrap pelleting systems from the aspect of the optimal main function of the system
Časopis | Machine Design |
---|---|
Godina | 2007 |
Autori | Milan Tica and Milosav Đurđević |
Strana od | 435 |
Strana do | 438 |
The use of evolutionary principles and Altschuller matrix in determination of direction of further lumber scraps pelleting sistem development,
Časopis | Facta universitatis, Series: Physical Education and sport |
---|---|
Godina | 2006 |
Autori | Milan Tica |
Volumen | 4 |
Broj | 1 |
Strana od | 93 |
Strana do | 103 |
Modeling of partial functions of lumfer scraps pelleting system and the selection of principl solutions according to Altschuller matrix
Časopis | Journal of Mechanical Engineering Design |
---|---|
Godina | 2005 |
Autori | Milan Tica and Milosav Đurđević |
Volumen | 8 |
Broj | 1 |
Strana od | 24 |
Strana do | 31 |
Radovi sa skupova
CONTEMPORARY PLANETARY GEARBOXES AND THEIR CALCULATION.
Naučni skup | 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2023 |
---|---|
Godina | 2023 |
Autori | Željko Vrcan, Milan Tica, Sanjin Troha, and Miroslav Milutinović |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
Naučni skup | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
---|---|
Godina | 2022 |
Autori | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
IDENTIFICATION DESIGN PARAMETERS OR LOAD CAPACITY IN MANUAL GEARBOX FOR DIFFERENCE WORKING CONDITIONS.
Naučni skup | . 6th International scientific conference COMETa-2022 |
---|---|
Godina | 2022 |
Autori | Miroslav Milutinović, Sanjin Troha, M Isametova, Spasoje Trifković, Milan Tica, and K Singkh |
BAUKASTEN PLANETARY TRANSMISSION CONSTRUCTION SYSTEM
Naučni skup | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
---|---|
Godina | 2022 |
Autori | Vojislav Miltenović, Biljana Marković, and Milan Tica |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
Naučni skup | 6th International scientific conference COMETa-2022 |
---|---|
Godina | 2022 |
Autori | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
Strana od | 415 |
Strana do | 420 |
DIGITAL TRANSFORMATIONS IN MECHANICAL ENGINEERING, TRENDS IN EDUCATION IN THE FIELD OF MACHINE ELEMENTS AND SYSTEMS
Naučni skup | 10th International Scientific Conference IRMES 2022 |
---|---|
Godina | 2022 |
Autori | Milan Tica and Tihomir Mačkić |
Strana od | 41 |
Strana do | 52 |
POSSIBILITIES FOR THE APPLICATION OF REVERSIBLE PLANETARY TWO-SPEED GEARBOXES.
Naučni skup | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
---|---|
Godina | 2022 |
Autori | Sanjin Troha, Milan Tica, Željko Vrcan, and Miroslav Milutinović |
DIGITAL TRANSFORMATIONS IN MECHANICAL ENGINEERING, TRENDS IN EDUCATION IN THE FIELD OF MACHINE ELEMENTS AND SYSTEMS
Naučni skup | 10th International Scientific Conference IRMES 2022 |
---|---|
Godina | 2022 |
Autori | Milan Tica and Tihomir Mačkić |
Influence of Cycloid Disk Profile Correction on Contact Force
Naučni skup | 15TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2021 |
---|---|
Godina | 2021 |
Autori | Tihomir Mačkić, Nenad Marjanović, Goran Jotić, Milan Tica, and Željko Đurić |
Influence of Cycloid Disk Profile Correction on Contact Force
Naučni skup | 15TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2021 |
---|---|
Godina | 2021 |
Autori | Tihomir Mačkić, Nenad Marjanović, Goran Jotić, Milan Tica, and Željko Đurić |
Strana od | 282 |
Strana do | 285 |
TRANSMISSION CHARACTERISTICS OF SIMPLE CYCLOID DRIVE WITH STEPPED PLANETS
Naučni skup | 9th International Scientific Conference IRMES 2019, |
---|---|
Godina | 2019 |
Autori | Tihomir Mačkić, Milan Tica, and Roland Suba |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES,
Naučni skup | 14 TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2019 |
---|---|
Godina | 2019 |
Autori | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
Transmission characteristics of simple cycloid drive with stepped planets
Naučni skup | 9th International Scientific Conference - IRMES 2019 |
---|---|
DOI | 10.1088/1757-899X/659/1/012071 |
Godina | 2019 |
Autori | Tihomir Mačkić, Milan Tica, and Roland Suba |
Veb adresa | https://iopscience.iop.org/article/10.1088/1757-899X/659/1/012071 |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES
Naučni skup | 14th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI, Banja Luka, 2019 |
---|---|
Godina | 2019 |
Autori | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
Strana od | 385 |
Strana do | 390 |
PRODUCT DESIGN CASE STUDY: CONCEPTUAL SOLUTION OF HAND DRILL/ANGLE GRINDER TABLE STAND
Naučni skup | 4th International scientific conference COMETa-2018 |
---|---|
Godina | 2018 |
Autori | Milan Tica, Nikola Radulovic, and Tihomir Mačkić |
PRODUCT DESIGN CASE STUDY: CONSEPTUAL SOLUTION OF HAND DRILL/ANGLE GRINGER TABLE STAND
Naučni skup | Conference on Mechanical Engineering Technologies and Applications” COMETa 2018 |
---|---|
Godina | 2018 |
Autori | Milan Tica, Nikola Radulović, and Tihomir Mačkić |
Strana od | 351 |
Strana do | 358 |
Reducing of Scuffing Phenomenon at HCR Spur Gearing
Naučni skup | 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, |
---|---|
DOI | 10.1007/978-3-319-56430-2_10 |
Publikacija | Proceedingss 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, |
Godina | 2017 |
Autori | Milan Rackov, Maja Čavić, Marko Penčić, Ivan Knežević, Miroslav Vereš, and Milan Tica |
Strana od | 141 |
Strana do | 155 |
Vještačenje vozila – prikaz slučaja zapaljenja vozila
Naučni skup | Stručni skup Tehnički pregled vozila Republike Srpske |
---|---|
Godina | 2017 |
Autori | Milan Tica |
Strana od | 79 |
Strana do | 89 |
Analysis of load carryng capacity of worm gears from the aspect of engineering practice
Naučni skup | 13th International conference on accomplishments in mechanical and industrial engineering – DEMI 2017 |
---|---|
Godina | 2017 |
Autori | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, and Milan Banić |
Strana od | 611 |
Strana do | 617 |
Concept solution of the safety system for avoiding wrong fuel using in cars and prevention of damage
Naučni skup | 8th International Scinetific Conference IRMES 2017, Supported by: IFToMM International Federation for the Promotion of Mechanism and Machine Science |
---|---|
Godina | 2017 |
Autori | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
Strana od | 175 |
Strana do | 180 |
Power Losses and Efficiency of Worm Gears in Extreme Operating Conditions
Naučni skup | 3rd International scientific conference COMETa-2016 „Conference on Mechanical Engineering Technologies and Applications“ |
---|---|
Godina | 2016 |
Autori | Đorđe Miltenović, Milan Banić, Aleksandar Miltenović, and Milan Tica |
Strana od | 169 |
Strana do | 176 |
Car safety – ignition risk due to wrong fuel using
Naučni skup | XL Naučno – stručni skup ODRŽAVANJE MAŠINA I OPREME OMO 2015 |
---|---|
Godina | 2015 |
Autori | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
Strana od | 244 |
Strana do | 250 |
Product Design Case Stady: Conceptual Solution Log Splitter
Naučni skup | 3. International conference mechanical engineering in XXI century - MASING |
---|---|
Godina | 2015 |
Autori | Milan Tica, Slobodan Čapljak, Aleksandar Miltenović, and Milan Banić |
Strana od | 125 |
Strana do | 130 |
Science – generator of industrial and overall development of Serbia and Republic of Srpska
Naučni skup | 12TH International conference on accomplishments in electrical and mechanical engineering and information technology – DEMI 2015 |
---|---|
Godina | 2015 |
Autori | Radivoje Mitrović, Milan Tica, Ivana Atanasovska, and Predrag Popović |
Strana od | 41 |
Strana do | 52 |
Possibilities of Increasing Efficiency of Mechanical Transmissions
Naučni skup | 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering |
---|---|
Godina | 2014 |
Autori | Siniša Kuzmanović, Milan Rackov, Ivan Knežević, Klara Rafa, and Milan Tica |
Analysis of Existing Calculation Methods for Group Bolted Joints Loaded by a Moment Perpendicular to the Joint Plane
Naučni skup | 2. International conference mechanical engineering in XXI century - MASING |
---|---|
Godina | 2013 |
Autori | Siniša Kuzmanović, Milan Rackov, Klara Rafa, and Milan Tica |
Strana od | 205 |
Strana do | 208 |
Construction Solution of Press for Biomass Pelleting
Naučni skup | 48th INTERNATIONAL CONFERENCE OF MACHINE ELEMENTS AND MECHANISMS DEPARTMENTS 2007 |
---|---|
Godina | 2007 |
Autori | Vojislav Miltenović, M. Velimirović, Milan Tica, and Milan Banić |
Strana od | 199 |
Strana do | 206 |
DESIGNED SOLUTION FOR LUMBER SCRAP PALLETING SYSTEMS AND IDENTIFICATION KEYS CONSTRUCTION-TECHNOLOGICAL PARAMETARS FOR OPTIMAL WORK OF THE SYSTEM
Naučni skup | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2002 2006 |
---|---|
Godina | 2006 |
Autori | Milan Tica and Milosav Đurđević |
Strana od | 101 |
Strana do | 106 |
Review of Previous Wooden Waste Problem Solutions and Selection of Optimal Tehnology for Wooden Waste Procesing
Naučni skup | 18. Simpozijum termičara Srbije i Crne Gore |
---|---|
Godina | 2005 |
Autori | Milan Tica, Vojislav Miltenović, and Milosav Đurđević |
Raspodjela napona u podnožju zubaca za različite oblike debljine vijenca zupčanika
Naučni skup | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2004 |
---|---|
Godina | 2004 |
Autori | Milosav Đurđević and Milan Tica |
Strana od | 595 |
Strana do | 600 |
3D modeliranje cilindričnih zupčanika sa pravim zupcima integracijom softvera „CATIA“ i „EXCELL“
Naučni skup | Simpozijum o mehaničkim prenosnicima |
---|---|
Godina | 2003 |
Autori | Mićo Stanojević, Milosav Đurđević, and Milan Tica |
Strana od | 78 |
Strana do | 81 |
Uticaj oblika tijela velikih zupčanika na pouzdanost zupčastih parova
Naučni skup | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2002 |
---|---|
Godina | 2002 |
Autori | Milosav Đurđević and Milan Tica |
Strana od | 631 |
Strana do | 636 |
Optimalne dimenzije dvostepenih konusno-cilindričnih zupčastih reduktora
Naučni skup | Simpozijum o mehaničkim prenosnicima |
---|---|
Godina | 2001 |
Autori | Milosav Đurđević, Milan Tica, and Mićo Stanojević |
Strana od | 111 |
Strana do | 114 |
Raspodjela opterećenja po dodirnim linijama bokova zubaca za granična odstupanja mjera i oblika zupčanika
Naučni skup | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2000 |
---|---|
Godina | 2000 |
Autori | Milosav Đurđević and Milan Tica |
Strana od | 223 |
Strana do | 228 |
Knjige
KONSTRUKCIONI ELEMENTI U MAŠINOGRADNJI 2
Izdavač | Univerzitet u Istočnom Sarajevu – Mašinski fakultet, Istočno Sarajevo |
---|---|
ISBN | 978-99976-719-5-0 |
Godina | 2020 |
Autori | Vojislav Miltenović, Milan Tica, and Biljana Marković |
Tip knjige | osnovni udžbenik |
Broj strana | 600 |
KONSTRUKCIONI ELEMENTI U MAŠINOGRADNJI 1
Izdavač | Univerzitet u Istočnom Sarajevu – Mašinski fakultet, Istočno Sarajevo |
---|---|
ISBN | 978-99976-719-3-6 |
Godina | 2018 |
Autori | Vojislav Miltenović, Biljana Marković, and Milan Tica |
Tip knjige | osnovni udžbenik |
Broj strana | 588 |
OSNOVE TEHNIČKIH PROPISA
Izdavač | Univerzitet u Beogradu - Mašinski fakultet |
---|---|
ISBN | 978-86-7083-861-1 |
Godina | 2015 |
Autori | Radivoje Mitrović, Žarko Mišković, Zoran Stamenić, Biljana Marković, and Milan Tica |
Tip knjige | osnovni udžbenik |
INOVACIJE I PATENTI - teorija rješavanja pronalazačkih zadataka
Izdavač | Univerzitet u Banjoj Luci - Mašinski fakultet |
---|---|
ISBN | 978-999-38-39-56-9 |
Godina | 2015 |
Autori | Milan Tica, Radivoje Mitrović, Aleksandar Miltenović, Žarko Mišković, and Milan Banić |
Tip knjige | pomoćni udžbenik |
Projekti
Podrska uspostavljanju i razvoju preduzeca kroz uspostavljanje novog mehanizma podrske i osnivanje i razvoj firmi za lica mladja od 30 godina
Project Number | 1255029 |
---|---|
Status | Neaktivan |
Type of project | Medjunarodni strucni (profesionalni) |
Organizational unit | Elektrotehnicki fakultet |
Head | prof. dr Branko Blanusa |
Participants |
prof. dr Milan Tica prof. dr Vladimir Risojevic prof. dr Zeljko Ivanovic prof. dr Drazen Brdjanin Igor Dujlovic, ma Goran Banjac, ma |
Business Partner | EVROPSKA UNIJA BIH |
Beginning of realization | 2021-02-01 |
End of the project | 2022-06-01 |
Project value | 19558.0 BAM |